All About Guitars
Guitar Bridge Adjustment
There is no doubt about it - the best way to have repairs done to your guitar is to take it to a guitar shop professional. This is because most repairs needed are beyond the expertise of an amateur and if you try to mess with you even if you are likely to cause further damage. Of course, if you take good care of your guitar should not really need to perform any repairs. A frequent mistake people make with their guitars is to leave them in the car. When you out boiling, the temperature inside the vehicle is too hot to leave the guitar there as the adhesive on it will break and it will literally fall to pieces.
If it is really necessary for you to have your guitar with you when you travel, you should pack it in a hard case surrounded by lots filling, especially around the neck of the guitar. If you are traveling on an airplane, you should protect it further in a well padded box.
There are, however, some minor adjustments that are easy for amateurs to do, for example, adjusting the intonation of his electric guitar. This will necessary if you have recently changed the thickness of the strings or the action, which is the distance between the strings and fret board. Many guitarists do this twice years as a natural thing.
Maneuver is quite simple to do, moving the Saddle Bridge (which is the piece of metal on the bridge of the guitar as the rest of strings) or backward or forward. To move the Saddle Bridge, the screw that holds it in place and needs adjustment is useful to have an Allen wrench to use for this operation. Other than that, the only tool you need is a small screwdriver. The saddle bridge only needs to be moved very little so be careful when you are running screw.
When you make the adjustment you need to make sure each string sounds the same when played in the open position as it does in the 12th fret. If you are not confident in your own sense of hearing to get this just right, you should use an electric guitar tuner. Each time you make an adjustment, you will need to transform the string back again And before you can check the intonation.
Occasionally on an electric guitar the truss rod will also need adjustment. Do not try to do it yourself unless you are absolutely sure that you are able - the best it is to take it to a professional. The tensor is a piece of steel running down the neck of his guitar and making an adjustment that will relieve a convex arc or concave on the neck. Be warned - if this is not done correctly your guitar may suffer permanent and irreversible damage.
About the Author:
Kevin Sinclair is the publisher and editor of MusicianHome.com, a site that provides information and articles for musicians at all stages of their development.
Article Source: ArticlesBase.com - How To Repair Your Guitar
Guitar Intonation Tutorial from HowAudio.com and Synthesis.n
|
|
Behringer NU1000DSP iNuke Power Amplifier $299.99 Behringers revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures that this feather-light powerhouse will drive your rig effortlessly for many years to come.Superb transient responseThe fine folks at Behringer have spent years fine-tuning the high-density Class-D technology that gives the iNUKE 1000DSP its oomph. By carefully selecting transi... |
|
|
The Acoustic Guitar: Adjustment, Care, Maintenance and Repair (Volume I) $24.26 A good guitar repairman is hard to find, and when found, a long waiting list seems inevitable. Those who have confronted this problem may now turn to Don E. Teeterâs encyclopedic treatment of guitar adjustment, maintenance, and repair. Profusely illustrated with line drawings and photographs and written in a clear and straightforward style, this book takes the reader on a guided tour of the a... |
Didnt See What You Are Looking For? - Try Google!
Custom Search