All About Guitars
Guitar Fret Buzz
Most new guitars arrive from the factory with the nut just barely playable. Older guitars may have the nut filed or worn so that fret buzz can not be eliminated by neck or string height adjustment. If you have a new guitar, or you are replacing the nut with a new, here is an alternative method to the file and adapt the material to make your guitar nut like the pros Play Guitars.
Before adjusting anything, make sure your guitar is tied correctly and that your neck is straight and not bowed or warped. If your neck is bowed you first need to adjust the truss rod. If your neck is twisted, will require a more extensive repair. For the lowest possible actions or avoid fret buzz throughout your finger plate may be necessary to have your frets leveled and crowned first.
You will need a set of nut files (available from Stewart MacDonald), and a good set of feeler gauges as well. Different grades of sandpaper are very useful too.
Fret each string individually, starting with the High E, between the second and third fret, use the calibrator strip to check the amount of space between the bottom string and first fret. You should have about .005 "of space between each one, with the sequence barely touching the second fret. If this measure is close or dead then move to the next sequence to the Low E string. You may want to record the difference on a piece of scrap paper as you move across the fret board, to see the time slot of the nut in relation to the fret board as do.
For most players from a height of strings (also known in the jargon of the guitar as "action") 3 / 64 " an inch is considered normal. Some players choose from a greater height and minced 4 / 64 "of an inch, while the players tend to have a light touch and want more Quick action can seek to reduce the action as close as possible to 2 / 64, "which in many cases is very difficult to set and maintain without fret buzzing somewhere in the finger board.
Sure, you can use the traditional method to set the height of the rope over the nut, tentacle by using several indicators below the nut, and filing, to the depth and width of the factory. However, I found this method to provide one if feel better and more consistent when playing near the nut.
About the Author:
Andrew Preston is a professional guitar session player and dabbles in part time guitar repair. Your can see more information at Guitar Savant
Article Source: ArticlesBase.com - An Alternative Way To Adjust Your Guitar Nut
Fixing Guitar Fret Buzz : Guitar Fret Fixing Tools
|
|
Guitar One Presents Fret Buzz: A Fast Fix of Musical Tidbits, Nuggets and Other Practical Information $15.26 From the pages of Guitar One magazine comes Fret Buzz, a guide to licks, riffs, harmonic ideas, and technique for the serious blues/rock guitarist. From the familiar to the obscure, you'll find an arsenal of material here. Includes 33 great lessons on topics such as: country licks, essential endings, beyond the blues box, guitar fitness, chord connections, scale sequences, string bending, pedal to... |
Didnt See What You Are Looking For? - Try Google!
Custom Search